Originally Posted by
teckat
depending on the E602-XXXX (SUB-CODE) u may be able get lucky and have an easy fix>
E602 The hard disk is faulty.
0001=The fault may be a HD detection error, in which the HD cannot be detected. The
machine may fail to become ready (returning an error code).
0002=The startup file is absent. The program for the main CPU does not exist on the HD, in
BOOTDEV/BOOT or the like.
0003=The fault is a HD write/abort error. The machine fails to read sectors of the HD.
0005=It is a fault in the detection of the HD controller IC. It is detected when the HD controller
IC cannot be recognized or an error is detected in it.
0006=The auxiliary startup file is absent. The correct SUB CPU program does not exist
on the HD or in BOOTDEV/BOOT or the like.
0007=The color profile file does not exist. The correct color profile file does not exist in
BOOTDEV/PDL or the like.
01xx=The partition DOSDEV is faulty.(For detail code, see below.)
02xx=The partition PSTDEV is faulty.(For detail code, see below.)
03xx=The partition DOSDEV2 is faulty.(For detail code, see below.)
04xx=The partition FSTPDEV is faulty.(For detail code, see below.)
05xx=The partition DOSDEV3 is faulty.(For detail code, see below.)
06xx=The partition PDLDEV is faulty.(For detail code, see below.)
07xx=The partition DOSDEV4 is faulty.(For detail code, see below.)
08xx=The partition BOOTDEV is faulty.(For detail code, see below.)
09xx=The partition DOSDEV5 is faulty.(For detail code, see below.)
FFXX=A fault exists in a partition that cannot be identified. (For detail code, see below.)
Detail code of E602
Last 2 bytes of detail code (indicated by XX)
01=Device error: sector, write/abort, other HDD access (driver) error
02=File system (logic) error: error detection by check processing; mounting failure
03=Other error: HDD connector fault; HDD detection failure; secondary error as of DRAM fault
10=HD controller HD controller IC, driver No. error
11=HD controller IC, driver not installed
12=HD controller IC, system error
13=HD controller IC, device error
14=HD controller IC, parameter error
21=packet R/W file operation, system error
22=packet R/W file operation, parameter error
23=packet R/W file operation, packet DMC error
24=packet R/W file operation, packet DMAC time-out
25=packet R/W file operation, HD controller IC error
Bookmarks