Hi guys,
Currently my IR6570 machine give very poor quality of print/copy as attached.
Untitled.jpg
Action: Change with new corona wire and clean-up main unit.
anyone could help me with this problem.
msmy
Hi guys,
Currently my IR6570 machine give very poor quality of print/copy as attached.
Untitled.jpg
Action: Change with new corona wire and clean-up main unit.
anyone could help me with this problem.
msmy
Yup. All three nods.
Try to polish a drum
The Road will be Mastered by >>> the Going...
Ok.
See..........Also...............
block.jpg
Check the surface of the cylinder of the developer unit is not worn, remember that the cylinder of the developer unit of this machine is black.
check if values are equal up to the values of service mode.
Go to SM and disable the potential control.
COPIER>OPTION>BODY>PO-CNT (enable/disable potential control)
0: disable potential control
1: enable potential control
If u want it "on" then change C/T corona and clean the PO senzor.
There is no same problems
The Road will be Mastered by >>> the Going...
Tq. I'll check it today. cheers..
What kind of Toner did you use ? Genuine ?
Bookmarks