Primary Transfer Roller Disengagement Control
The Primary Transfer Roller is usually engaged. The Primary Transfer Roller needs to be disengaged when a part is replaced; otherwise, the ITB can contact with the Drum Unit.
The timing to make the Primary Transfer Roller disengaged
• At the time of shipment
• In the case of selecting the ITB/Drum Unit replacement in service mode or user mode
The timing to make the roller engaged
• At power-on
• At recovery from sleep mode
• When the Front Door is opened/closed
The roller is engaged after the roller is once disengaged.
Related service mode:
• Execution of the Primary Transfer Roller disengagement
COPIER > FUNCTION > MISC-P > T1-UP
Related user mode:
• Execution of ITB/Drum Unit Replacement Mode
Adjustment/Maintenance > Maintenance > ITB/Drum Unit Replacement Mode > Start
The above mode is displayed by selecting the following in service mode:
COPIER > OPTION > DSPLY-SW > ITB-DSP > 1 (default: 0)
SW1.jpg
Bookmarks