Canon IRC 2030 E000074-0000

[Phil B.]

Can anyone help me out with Primary Transfer Disengagement Switch on Canon Image Runner Advance C2030. I would like to know where is the switch located and how to replace it.
Thanks Joe

well clearly you didn't READ THE DEAD THREAD..

sw01

[teckat]

Can anyone help me out with Primary Transfer Disengagement Switch on Canon Image Runner Advance C2030.

I would like to know where is the switch located and how to replace it.

Thanks

Joe

---

Primary Transfer Roller Disengagement Control
The Primary Transfer Roller is usually engaged. The Primary Transfer Roller needs to be disengaged when a part is replaced; otherwise, the ITB can contact with the Drum Unit.

The timing to make the Primary Transfer Roller disengaged
• At the time of shipment
• In the case of selecting the ITB/Drum Unit replacement in service mode or user mode
The timing to make the roller engaged
• At power-on
• At recovery from sleep mode
• When the Front Door is opened/closed

The roller is engaged after the roller is once disengaged.
Related service mode:
• Execution of the Primary Transfer Roller disengagement
COPIER > FUNCTION > MISC-P > T1-UP
Related user mode:
• Execution of ITB/Drum Unit Replacement Mode
Adjustment/Maintenance > Maintenance > ITB/Drum Unit Replacement Mode > Start
The above mode is displayed by selecting the following in service mode:
COPIER > OPTION > DSPLY-SW > ITB-DSP > 1 (default: 0)


SW1.jpg

[JPiek]

Eat, Sleep, Post, Repeat

[luis1984bol]

---

Primary Transfer Roller Disengagement Control
The Primary Transfer Roller is usually engaged. The Primary Transfer Roller needs to be disengaged when a part is replaced; otherwise, the ITB can contact with the Drum Unit.

The timing to make the Primary Transfer Roller disengaged
• At the time of shipment
• In the case of selecting the ITB/Drum Unit replacement in service mode or user mode
The timing to make the roller engaged
• At power-on
• At recovery from sleep mode
• When the Front Door is opened/closed

The roller is engaged after the roller is once disengaged.
Related service mode:
• Execution of the Primary Transfer Roller disengagement
COPIER > FUNCTION > MISC-P > T1-UP
Related user mode:
• Execution of ITB/Drum Unit Replacement Mode
Adjustment/Maintenance > Maintenance > ITB/Drum Unit Replacement Mode > Start
The above mode is displayed by selecting the following in service mode:
COPIER > OPTION > DSPLY-SW > ITB-DSP > 1 (default: 0)


SW1.jpg

Hello, that means the SW1 and SL1 are located inside in the ITB?

[teckat]

NO part # for SW1---need to order MAIN DRIVE ASSEMBLY


SW1 ( Primary Transfer Disengagement Switch) for Displacement )

on REAR Plate-- SW1 ( Primary Transfer Disengagement Switch) for Displacement, Replace the Main Drive Assembly if Needed, FM4-7716-000.
================================================== ================================================== ==========================

SL1 is part of the Fixing Drive Assembly and is not available as a separate part.



The Fixing Motor is involved in both the operation of the Fixing Assembly and the Primary Transfer Disengagement.

FM0-1158-010 ----------------Fixing Drive Assembly

[luis1984bol]

NO part # for SW1---need to order MAIN DRIVE ASSEMBLY


SW1 ( Primary Transfer Disengagement Switch) for Displacement )

on REAR Plate-- SW1 ( Primary Transfer Disengagement Switch) for Displacement, Replace the Main Drive Assembly if Needed, FM4-7716-000.
================================================== ================================================== ==========================

SL1 is part of the Fixing Drive Assembly and is not available as a separate part.



The Fixing Motor is involved in both the operation of the Fixing Assembly and the Primary Transfer Disengagement.

FM0-1158-010 ----------------Fixing Drive Assembly

Thank you very much. I have a problem with a iR ADV C2230. Error E0074-000. Fisrt, I will replace the ITB Unit, I hope that fix the problem. Thank you. I will let you know how it works.