Page 1 of 3 123 LastLast
Results 1 to 10 of 27
  1. #1
    Technician
    Join Date
    May 2012
    Location
    kuala lumpur
    Posts
    44
    Rep Power
    0

    Irc 3220 panel blank

    my canon IRC 3220 problem is machine sometimes panel blank when print and no copy come out. when i switch off and on machine again sometime ok. but after use it again same problem will appear.. can i know which parts have a problem?

  2. #2
    Service Manager 10,000+ Posts
    Irc 3220 panel blank

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    16,095
    Rep Power
    238

    Re: Irc 3220 panel blank

    Quote Originally Posted by adween shaari View Post
    my canon IRC 3220 problem is machine sometimes panel blank when print and no copy come out. when i switch off and on machine again sometime ok. but after use it again same problem will appear.. can i know which parts have a problem?

    on power off/always follow shut down procedure on control panel
    open back of printer/
    remove memory dimms/
    clean ends/
    re-seat/

    power up/
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  3. #3
    Technician
    Join Date
    May 2012
    Location
    kuala lumpur
    Posts
    44
    Rep Power
    0

    Re: Irc 3220 panel blank

    thnks for the info

  4. #4
    Senior Tech 100+ Posts Matoku's Avatar
    Join Date
    Feb 2008
    Location
    sabah
    Posts
    154
    Rep Power
    29

    Re: Irc 3220 panel blank

    Hi Teckat, I also facing the same problem and I have done the step you mantion above, replaced the distribution pcb and the machine still the same, Am I need to replace the Memory Ram?

    thanks

  5. #5
    Senior Tech 100+ Posts
    Irc 3220 panel blank

    Michael's Avatar
    Join Date
    Dec 2020
    Location
    Worms.Rheinland-Pfalz
    Posts
    158
    Rep Power
    12

    Re: Irc 3220 panel blank

    Hello , i know this threat is an older one but i have the same issue.. i have already reseat the Ram but still same issue.. any new information about this? thanks Michael
    My profile is not working at the moment. The profile you see is not mine. Board redirects to a wrong userprofile. So you CANīT REACH ME over the profile via SEND PRIVATE MESSAGE and even not over regular Email too

    You only can contact me if you click my name on a post and select PRIVATE MESSAGE straight from there.

  6. #6
    Senior Tech 100+ Posts
    Irc 3220 panel blank

    Michael's Avatar
    Join Date
    Dec 2020
    Location
    Worms.Rheinland-Pfalz
    Posts
    158
    Rep Power
    12

    Re: Irc 3220 panel blank

    hm... where are all the canon technicians? it would be really nice to get help... thanks michael
    My profile is not working at the moment. The profile you see is not mine. Board redirects to a wrong userprofile. So you CANīT REACH ME over the profile via SEND PRIVATE MESSAGE and even not over regular Email too

    You only can contact me if you click my name on a post and select PRIVATE MESSAGE straight from there.

  7. #7
    Senior Tech 100+ Posts
    Join Date
    Aug 2014
    Location
    lima
    Posts
    176
    Rep Power
    0

    Re: Irc 3220 panel blank

    hello, at some point it seems to me that I had that problem, in one machine the problem was in the accessory connectors (paper feed trays and the adf) in that connection set associated with the duplex motor, I chose to disable the duplex.

    Blank screen is also related to the main mainboard, RAM or SDRAM memory of the mainboard.

    Regards.

  8. #8
    Senior Tech 100+ Posts
    Join Date
    Aug 2014
    Location
    lima
    Posts
    176
    Rep Power
    0

    Re: Irc 3220 panel blank

    Hello, did you clean the main controller assembly, clean memory and sub pcbs boards (hdd, scan, print, etc) with a white eraser.

    regards

  9. #9
    Senior Tech 100+ Posts
    Irc 3220 panel blank

    Michael's Avatar
    Join Date
    Dec 2020
    Location
    Worms.Rheinland-Pfalz
    Posts
    158
    Rep Power
    12

    Re: Irc 3220 panel blank

    Hello, i reseat the memory, cards , reconnect hdd. The panel goes not off but went to orange red without any information on it. This is not always at same time or same job.
    My profile is not working at the moment. The profile you see is not mine. Board redirects to a wrong userprofile. So you CANīT REACH ME over the profile via SEND PRIVATE MESSAGE and even not over regular Email too

    You only can contact me if you click my name on a post and select PRIVATE MESSAGE straight from there.

  10. #10
    Service Manager 1,000+ Posts
    Irc 3220 panel blank

    skynet's Avatar
    Join Date
    Apr 2009
    Location
    127.0.0.1
    Posts
    2,127
    Rep Power
    126

    Re: Irc 3220 panel blank

    Have these got a screen contrast dial, maybe it's a problem with that pcb.
    When you think you have made a procedure idiot proof your company employs a better idiot.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here