Canon IR3080I Insert drum cartridge message

**jonbonse** · 01-23-2020

Hi guys,

I know this is an old thread but I was hopeful someone could send over the SST and firmware to fix this issue?

Many thanks

**Phil B.** · 01-23-2020

Originally Posted by jonbonse

Hi guys,

I know this is an old thread but I was hopeful someone could send over the SST and firmware to fix this issue?

Many thanks

CONTRIBUTORS will always get a better response to their requests.

and thanks for digging up a 7 year dead thread! you should have started a new thread of your own!

**jonbonse** · 01-24-2020

Originally Posted by Phil B.

CONTRIBUTORS will always get a better response to their requests.

and thanks for digging up a 7 year dead thread! you should have started a new thread of your own!

Thank you for your message.

I am now a fellow CONTRIBUTOR!

**tech28** · 01-24-2020

Dude, its the transfer belt, go to your wholesaler and get one whole machine for under 50 bucks and you will have parts for the machine and take care of your problem. Why go around the block to get across the street. Good Luck,

**jonbonse** · 01-24-2020

Originally Posted by tech28

Dude, its the transfer belt, go to your wholesaler and get one whole machine for under 50 bucks and you will have parts for the machine and take care of your problem. Why go around the block to get across the street. Good Luck,

I’ve got one from another machine but I wanted to go in fully loaded with the firmware.