Hi every one
I have a Canon IR 2270 and when scanning a document from the ADF it automatically scans both sides.
I have tried to go through the copier settings but have not had much luck finding a solution.
Hi every one
I have a Canon IR 2270 and when scanning a document from the ADF it automatically scans both sides.
I have tried to go through the copier settings but have not had much luck finding a solution.
Check the setting in service mode under COPIER>OPTION>BODY>LEVEL 2>SCANSLCT
to get into Level 2
(*28* then hit *2 COPIER>OPTION>BODY>SCANSLCT.)
There are two settings available.
0: OFF (Determining the scan area by document detection)
1: ON (Determining scan area by paper size)
If the setting is "1" the feeder will scan the original twice. Set to "0" for single scanning.
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
just tried it and it worked perfectly.
thank you
The Dude.jpgWELCOME
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
HOW TO SCAN BOTH SIDES OF AN ID CARD AND THEN MAKE 10 COPIES OF IT ON THE SAME SIDE OF A PAPER ON CANON IR2270???
I ATTACH A PHOTO .
PLEASE Answer The Question .
DWDQWD.jpg
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
NO NO NOTHING AT ALL. I NEED THIS BECAUSE MY COMPANY NEEDS AN ADDRESS PROOF OF ME .
IN THIS ID CARD MY NAME AND ADDRESS IS MENTIONED WITH MY PHOTO. THAT'S WHY I NEED IT LIKE THIS.
PLEASE HELP ME DUDE.
I think what you are looking for is called "Image combination". If it isn't under the 2-Sided shortcut, look under "Special features". A lot of Doctors offices use it to copy insurance cards.
The chance that higher life forms might have emerged in this way is comparable to the chance that a tornado sweeping through a junkyard might assemble a Boeing 747 from the materials therein. -Fred Hoyle
don't think "Image combination" will put that ID card Back to Back
u could try off the glass 1 to 2 sided--using the front of card then the back of card
• Make sure to place originals with a horizontal (landscape) orientation, such as LTRR and
STMTR, horizontally. If these originals are placed vertically, the back side of the copy is
printed upside down.
The 1 2-Sided mode cannot be used with the Two-page Separation, Image
Combination, Booklet, or Transparency Interleaving mode.
**Knowledge is time consuming, exhausting and costly for a trained Tech.**
Bookmarks