New HDD for C3380

[XeNos]

I bought a used machined and they removed the HDD due to privacy rules. Where do i go to get the instructions and software to reinstall on a new HDD.

Aaorn

[SCREWTAPE]

I bought a used machined and they removed the HDD due to privacy rules. Where do i go to get the instructions and software to reinstall on a new HDD.

Aaorn

You can buy it.

And I mean this sincerely.

The best way to get this done is to purchase the hardware first.

If you need help in doing this. I would be more than glad to help you.

I can get you the HDD and the firmware.

[XeNos]

You can buy it.

And I mean this sincerely.

The best way to get this done is to purchase the hardware first.

If you need help in doing this. I would be more than glad to help you.

I can get you the HDD and the firmware.

how much?

[XeNos]

how much

[SCREWTAPE]

I will find out for you. Give me a few.

[SCREWTAPE]

I sent an pm to you stating.

I need a email address for now

[SCREWTAPE]

There are some procedures that might be a little difficult when you don't know what the procedures are.

You will have to connect to the machine with a crossover cable.

You must have a service support tool (SST) to reload/flash firmware.

The next other thing is, you will have to format the new HDD with a HD-Format file.

If I could get you the HDD with everything loaded. Then all you have to do is install the HDD onto the main controller.

Let me know if you are still interested

[canonbundy]

There are some procedures that might be a little difficult when you don't know what the procedures are.

You will have to connect to the machine with a crossover cable.

You must have a service support tool (SST) to reload/flash firmware.

The next other thing is, you will have to format the new HDD with a HD-Format file.

If I could get you the HDD with everything loaded. Then all you have to do is install the HDD onto the main controller.

Let me know if you are still interested

"Build me up Buttercup .......just to let me down"

[DAG COPIERS & COMPUTERS]

There are some procedures that might be a little difficult when you don't know what the procedures are.

You will have to connect to the machine with a crossover cable.

You must have a service support tool (SST) to reload/flash firmware.

The next other thing is, you will have to format the new HDD with a HD-Format file.

If I could get you the HDD with everything loaded. Then all you have to do is install the HDD onto the main controller.

Let me know if you are still interested

This is certainly a very good deal, I wouldn't miss it.