Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 8 of 8
  1. #1
    Senior Tech 100+ Posts
    Join Date
    Aug 2012
    Posts
    121
    Rep Power
    0

    colorpass GX300 & imagepress Q2

    i want to ask if the colorpass GX300 and imagepress Q2 have the same software

  2. #2
    Service Manager 10,000+ Posts
    colorpass GX300 & imagepress Q2

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    15,964
    Rep Power
    232

    Re: colorpass GX300 & imagepress Q2

    imagePRESS Server T1 / T2 / Q1 / Q2, imagePASS C2 / H1 / J1, ColorPASS GX100 / GX200 / GX300

    "System Updates" are enabled through the RUI for the imagePASS or ColorPASS


    1) Enter the IP ADDRESS of the imagePASS or ColorPASS into the address field of Internet Explorer or other web browser being used.

    2) Click the [CONFIGURE] tab.

    3) Click on [Launch Configure].

    4) You will get a Login Screen. The default password is: Fiery.1




    5) Click on [Server] in the left panel.

    6) Click on [System Update] in the left panel.



    7) Put a check mark next to [Enable System Update] in the right panel.

    8) Select the Day and the time you would like the update to take place and hit APPLY.

    9) Reboot the device to ensure the changes to take effect.
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  3. #3
    Senior Tech 100+ Posts
    Join Date
    Aug 2012
    Posts
    121
    Rep Power
    0

    Re: colorpass GX300 & imagepress Q2

    Quote Originally Posted by teckat View Post
    imagePRESS Server T1 / T2 / Q1 / Q2, imagePASS C2 / H1 / J1, ColorPASS GX100 / GX200 / GX300

    "System Updates" are enabled through the RUI for the imagePASS or ColorPASS


    1) Enter the IP ADDRESS of the imagePASS or ColorPASS into the address field of Internet Explorer or other web browser being used.

    2) Click the [CONFIGURE] tab.

    3) Click on [Launch Configure].

    4) You will get a Login Screen. The default password is: Fiery.1




    5) Click on [Server] in the left panel.

    6) Click on [System Update] in the left panel.



    7) Put a check mark next to [Enable System Update] in the right panel.

    8) Select the Day and the time you would like the update to take place and hit APPLY.

    9) Reboot the device to ensure the changes to take effect.

    hi MR Teckat
    ii want to ask if the server not go to the ready or idle state
    this system update can be done or i mean the rui can be loaded (i think it does not called rui but WebTool)

  4. #4
    Service Manager 10,000+ Posts
    colorpass GX300 & imagepress Q2

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    15,964
    Rep Power
    232

    Re: colorpass GX300 & imagepress Q2

    What exactly is your issue & on what SERVER MODEL




    To access the copier's RUI through Web Tools
    : 1. Open a Web Browser and type in the IP address of the imagePASS to bring up the Fiery Web Tools.
    2. Click Status in Web Tools.
    3. Click the Remote UI button.
    4. This will access the RUI for the connected copier.
    ================================================== ========

    To access the copier's RUI through the Fiery in one step: 1. Open a Web Browser and type in the following URL:
    http://:8080/

    Newer imagePASS Controllers, ColorPASS GX100, and imagePRESS Server Controllers:

    On the newer imagePASS controllers, ColorPASS GX100, and imagePRESS Server controllers, there is a link to launch the RUI on the Home tab of the Web Tools.

    If using the FACI Kit from the RIP/
    To access the RUI from the FACI Kit:
    1. Launch IE.
    2. Enter 10.255.255.2 for the URL.
    3. The RUI on the copier will then display successfully.
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  5. #5
    Senior Tech 100+ Posts
    Join Date
    Aug 2012
    Posts
    121
    Rep Power
    0

    Re: colorpass GX300 & imagepress Q2

    Quote Originally Posted by teckat View Post
    What exactly is your issue & on what SERVER MODEL




    To access the copier's RUI through Web Tools
    : 1. Open a Web Browser and type in the IP address of the imagePASS to bring up the Fiery Web Tools.
    2. Click Status in Web Tools.
    3. Click the Remote UI button.
    4. This will access the RUI for the connected copier.
    ================================================== ========

    To access the copier's RUI through the Fiery in one step: 1. Open a Web Browser and type in the following URL:
    http://:8080/

    Newer imagePASS Controllers, ColorPASS GX100, and imagePRESS Server Controllers:

    On the newer imagePASS controllers, ColorPASS GX100, and imagePRESS Server controllers, there is a link to launch the RUI on the Home tab of the Web Tools.

    If using the FACI Kit from the RIP/
    To access the RUI from the FACI Kit:
    1. Launch IE.
    2. Enter 10.255.255.2 for the URL.
    3. The RUI on the copier will then display successfully.
    can i use system update to change the language of the controller

  6. #6
    Service Manager 10,000+ Posts
    colorpass GX300 & imagepress Q2

    teckat's Avatar
    Join Date
    Jan 2010
    Location
    VA
    Posts
    15,964
    Rep Power
    232

    Re: colorpass GX300 & imagepress Q2

    On Printer control panel/-> Scroll to &
    press [Printer] TAB>
    Press [Printer Status/Settings]
    Functions

    On Q2 Print Server Control Panel> scroll to Run Set Up>Language screen > ?
    or-----------------
    Check in Command Work Station/or Web Tools, check under Server Setup.
    Check your Market Region Language selection ?

    Or>>>
    Language Switch Shortcut Key for>>

    imageRUNNER 2270 / 2870 / 3570 / 4570 / 3025 / 3030 / 3035 / 3045 / 5050 / 5055 / 5065 /5070 / 5075 / 5570 / 6570 / 8070 / 9070 / 85+ / 105+ / 7086 / 7095 / 7105 / 3225 / 3230 / 3235 /3245,
    Color imageRUNNER C3170 / C5870 / C6870 / C2880 / C3380 / C2550 / C3080 / C3480 / C4080 / C4580 / C5180 / C5185 / C5058 / C5068,

    & All imagePRESS Series

    Language Switch Shortcut Key

    How it is configured and how is it used

    The Language Switch Shortcut, when enabled, is displayed next to the 'System Monitor' button on the device LCD screen as shown in the image below. It allows users to walk up to the device to quickly and easily switch the LCD display to their desired language. This shortcut can be useful if, for example, the device is located in a hotel's business center where people from all over the world want to access the device.



    I. Configuring the Language Switch Shortcut Key

    1. Go to Additional Functions / Common Settings / Language Switch and the following screen will appear:



    2. Press ON

    3. Select a default language

    4. Select 'Display Shortcut Key' (when this option is selected the button will change from gray to teal in color)

    5. Press OK

    Using the Language Switch Shortcut Key

    When a user wants to change the display language they have to click on the Shortcut Key, which will bring them to the 'Language Switch' screen.
    From here they select the desired language by highlighting it from the list and press OK. This will return them to the copier main LCD screen where all buttons and text will be displayed in the selected language.
    Last edited by teckat; 07-05-2014 at 07:19 PM.
    **Knowledge is time consuming, exhausting and costly for a trained Tech.**

  7. #7
    Junior Member
    Join Date
    Nov 2012
    Location
    Ciudad Real
    Posts
    9
    Rep Power
    0

    Red face Re: colorpass GX300 & imagepress Q2

    Quote Originally Posted by wassem View Post
    hi MR Teckat
    ii want to ask if the server not go to the ready or idle state
    this system update can be done or i mean the rui can be loaded (i think it does not called rui but WebTool)
    Hello,

    Does anyone know where can I find the system software for GX-300 for C5051?

    Thanks in advance.

  8. #8
    Service Manager 5,000+ Posts
    colorpass GX300 & imagepress Q2

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    5,708
    Rep Power
    105

    Re: colorpass GX300 & imagepress Q2

    Quote Originally Posted by ofiexpertos View Post
    Hello, Does anyone know where can I find the system software for GX-300 for C5051? Thanks in advance.
    Not on thread topic


    dead thread for 5years

    start your own damn thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here