Once you press RUN it won’t stop unless you turn the power off. Anyone work in these ?
Thanks,
Dave
Once you press RUN it won’t stop unless you turn the power off. Anyone work in these ?
Thanks,
Dave
Bad switch?
The control panel PCB is notorious for failing on these. Often times causing the motor to run backwards as well.
If it runs constantly you might also have a triac problem.
I would start with the Triac (You can find a match at an electronic supplier) and if you still have issues replace the PCB and membrane.
07050703 TRIAC
704090313 SWITCH MEMBRANE (RUBBER) 1
706011113 CONTROL PANEL PCB ASSY. 1
Lee
Bookmarks