Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 4 of 4
  1. #1
    Senior Tech 100+ Posts
    Join Date
    Nov 2015
    Location
    archdale,nc
    Posts
    112
    Rep Power
    12

    GBC Ultima 65 laminator

    Once you press RUN it won’t stop unless you turn the power off. Anyone work in these ?
    Thanks,
    Dave

  2. #2
    Senior Tech 100+ Posts
    Join Date
    Nov 2015
    Location
    archdale,nc
    Posts
    112
    Rep Power
    12

    Re: GBC Ultima 65 laminator

    Quote Originally Posted by deputydogg View Post
    Once you press RUN it won’t stop unless you turn the power off. Anyone work in these ?
    Thanks,
    Dave
    Update. The machine runs constantly when powered on, no control panel buttons have any affect.

  3. #3
    Senior Tech 500+ Posts kuby's Avatar
    Join Date
    Oct 2007
    Location
    Texas
    Posts
    971
    Rep Power
    37

    Re: GBC Ultima 65 laminator

    Bad switch?

  4. #4
    Senior Tech 100+ Posts
    GBC Ultima 65 laminator

    wjurls's Avatar
    Join Date
    Feb 2017
    Location
    Riverside
    Posts
    131
    Rep Power
    14

    Re: GBC Ultima 65 laminator

    The control panel PCB is notorious for failing on these. Often times causing the motor to run backwards as well.

    If it runs constantly you might also have a triac problem.

    I would start with the Triac (You can find a match at an electronic supplier) and if you still have issues replace the PCB and membrane.



    07050703 TRIAC
    704090313 SWITCH MEMBRANE (RUBBER) 1
    706011113 CONTROL PANEL PCB ASSY. 1

    Lee

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here