Konica minolta c550, network tab not available

[Hq3r]

Hi guys, hope you call are doing well, I mean facing issue with network tab I can't connect with tcp/IP with ethernet cable directed connected with pc and machine, I had luck at USB connection worked but now it is gone too...
In setting paper, I do get a IP address and Mac but when I try to install printer it never shows up.. I have read some old posts on this forum and tried few stuff and learned, last thing I did was, changing auto IP off and keep on manual IP because I had to install printers everytime after powering off .
Waiting for your response 😌

[tsbservice]

Try to reset network settings.

[Synaux]

Try to reset network settings.

He will need the NVRAM / NIC reset firmware.

[copyman]

Hi guys, hope you call are doing well, I mean facing issue with network tab I can't connect with tcp/IP with ethernet cable directed connected with pc and machine, I had luck at USB connection worked but now it is gone too...
In setting paper, I do get a IP address and Mac but when I try to install printer it never shows up.. I have read some old posts on this forum and tried few stuff and learned, last thing I did was, changing auto IP off and keep on manual IP because I had to install printers everytime after powering off .
Waiting for your response 😌

Few stupid things to check,

HDD is installed

Is the controller set to "0" in serv mode if no Fiery

[Synaux]

Few stupid things to check,

HDD is installed

Is the controller set to "0" in serv mode if no Fiery

Set it to 1 if Fiery installed.

You are absolutely correct, I went full FW.