Thanks: 
Likes: 
Dislikes: Has anyone had any success rebuilding C8000 lower fusing belt units?
Konica C8000 Lower Fusing Belt Unit rebuild
Has anyone had any success rebuilding C8000 lower fusing belt units?
why the need to post the same question in TWO different forums?Originally Posted by cricketsi
you post in KM forum..
IMHO no need to post in this one.
Noticed the sub-forums after this post....can't find how to delete posts. Maybe I don't have authorization to delete?why the need to post the same question in TWO different forums?
you post in KM forum..
IMHO no need to post in this one.
ONLY ADMIN CAN
pm ANEURYSM for help with that.
There is a limited number of hours after you start a thread or post a reply during which you can edit or delete your post. If it still says Edit Post at the bottom right then that time has not expired.
It's 8 or 10 hours. After that only the Admin can change it. =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Re: Konica C8000 Lower Fusing Belt Unit rebuild
konica C 8000 lower fusing belt can rebuild successfully
but it depends on your user belt unit present condition
thanks
Reply With Quote
Bookmarks