Good morning
I am hoping to get some assistance here please , i am sitting with 2x Olivetti 3002MF machines both giving C2000 machine failure errors , the has just started recently and the other one we have replaced main drive and cleaned out the drum unit which helped for a short while , there is no c2000 machine failure listed in the tech manual so we using another model to try find what the error code means
has anyone maybe had this issue before and resolved it
thank you
Yes I also find in internet C2000 error about main motor. Did you replace it? Also check that all units like dev/drum/fuser are not binding.
A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
Blessed are they who can laugh at themselves, for they shall never cease to be amused.
I don't reply to private messages from end users.
I did replace main motor and checked all units
I suspect this cross-references to a Kyocera ... do you know which? =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Is it a Matsuri? =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Thanks: 
Likes: 
Dislikes: 
Reply With Quote
Bookmarks