Hay Guys ,
I am facing a problem in Ricoh MP2550 Photocopier showing the SC 860 Error.I have replaced the Hard drive but when try to formate it by 5832 code it shows the message "failed" .I donot know the reason .can some body help me?
Thanks
Hay Guys ,
I am facing a problem in Ricoh MP2550 Photocopier showing the SC 860 Error.I have replaced the Hard drive but when try to formate it by 5832 code it shows the message "failed" .I donot know the reason .can some body help me?
Thanks
Regards Mark
FOR TRADE AND END USER SERVICE CALLS PLEASE VISIT WEB SITE FOR CONTACT DETAILS. COVERING GREATER LONDON {UK} AND ALL SURROUNDING COUNTIES.
RICOH, CANON, KYOCERA, KONICA, SHARP, HP/SAMSUNG BROTHER, LEXMARK.
https://copierservices.simdif.com
Let's take a hint from what the trouble shooting guide in the service manual says. "The hard disk connection is not detected because it is defective or has not been formatted." Try a new set of cables.
Was this a new or used HDD?
You can use a used one I usually format that in Widows using a USB caddy & run scan disk etc.
When you first fit the HDD in the Ricoh it should romt you to format.
To enable larger HDD support you'll need to update ALL the firmware files first.
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
Bookmarks