Service manual or service mode for the Samsung X7600GX

[RodneyJ]

Thanks so much guys. I really appreciate it. And I apologize for submitting to the wrong forum.
It was the fuser wrap error. The wierd thing about is that it took numerous attempts to get into service mode. The printer simply would not enter into the service mode. When it finally did I was able to reset the fuser wrap error. Up and running perfect now. Thanks again guys.

[Phil B.]

Thanks so much guys. I really appreciate it. And I apologize for submitting to the wrong forum.
It was the fuser wrap error. The wierd thing about is that it took numerous attempts to get into service mode. The printer simply would not enter into the service mode. When it finally did I was able to reset the fuser wrap error. Up and running perfect now. Thanks again guys.

Samsux's are one of the worst to work on.. glad my ex boss dropped that line.