Does anyone have the service manual or directions on how to get into service mode on the Samsung X7600GX? Its throwing a M2-1317 code=paper error
Does anyone have the service manual or directions on how to get into service mode on the Samsung X7600GX? Its throwing a M2-1317 code=paper error
completely wrong forum for manual requests.... those requests per forum rules should go here ---> https://www.copytechnet.com/forums/s...nual-requests/
technical problems for Samsux units should go here https://www.copytechnet.com/forums/samsung/
Regards Mark
FOR TRADE AND END USER SERVICE CALLS PLEASE VISIT WEB SITE FOR CONTACT DETAILS. COVERING GREATER LONDON {UK} AND ALL SURROUNDING COUNTIES.
RICOH, CANON, KYOCERA, KONICA, SHARP, HP/SAMSUNG BROTHER, LEXMARK.
https://copierservices.simdif.com
I have to say that Mark(mga) is one of finest gents I know here at CTN. There are some fellow techs who I will gladly meet and share good time with and two Marks from UK in my friends list(mga and raplma) are definitely in that list. Good for old England
A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.
Blessed are they who can laugh at themselves, for they shall never cease to be amused.
I don't reply to private messages from end users.
Regards Mark
FOR TRADE AND END USER SERVICE CALLS PLEASE VISIT WEB SITE FOR CONTACT DETAILS. COVERING GREATER LONDON {UK} AND ALL SURROUNDING COUNTIES.
RICOH, CANON, KYOCERA, KONICA, SHARP, HP/SAMSUNG BROTHER, LEXMARK.
https://copierservices.simdif.com
Stop it now {cheques are in the post}
Thank you.
Regards Mark
FOR TRADE AND END USER SERVICE CALLS PLEASE VISIT WEB SITE FOR CONTACT DETAILS. COVERING GREATER LONDON {UK} AND ALL SURROUNDING COUNTIES.
RICOH, CANON, KYOCERA, KONICA, SHARP, HP/SAMSUNG BROTHER, LEXMARK.
https://copierservices.simdif.com
- Code: M2-1317
- Display:Paper Jam inside machine
- Description:A paper jam was detected in the fuser unit area.
- Remedy:• If the machine supports fax. 1) Open the top cover. Remove the jammed paper. 2) Turn the machine off. 3) Turn the machine on while pushing the cancel button. Wait for rebooting the machine. • If the machine not supports fax. 1) Open the top cover. Remove the jammed paper. 2) Entering Tech Mode : Menu # 1 9 3 4. 3) Select Data Setup. 4) Wrap Jam Clear Select Yes by Ok button, and the machine is rebooted after Error Clear.
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
Bookmarks