Results 1 to 3 of 3
  1. #1
    Junior Member
    Join Date
    Jul 2021
    Location
    Port Moresby
    Posts
    3
    Rep Power
    0

    Konica Minolta accurio press c2060 keeps Jamming

    Hello everyone

    Newbie here and this is my first post.

    I have a paper Jamming issue with machine KM 2060 Accurio press.

    It keeps Jamming in 2 places.

    When faced down its giving jam code 3203

    When face up its giving jam code 3201 and the paper goes and stops at RU509

    I've checked the sensor and actuator in the fusing unit and it's working. Spring on actuator looks fine.

    I've gone into service mode and checked the sensors and they are okay.

    I've removed the all the gears in the fusing unit and cleaned thoroughly but problem still persists.

    Would really appreciate any help on this.

    Thank you.

  2. #2
    Master Of The Obvious 10,000+ Posts
    Konica Minolta accurio press c2060 keeps Jamming

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,444
    Rep Power
    462

    Re: Konica Minolta accurio press c2060 keeps Jamming

    Your jams indicate that the paper passes PS22 or PS10, but does not pass PS27 whether simplex or duplex. So I'd look in the area indicated by the red circle:

    J3203_J3201.jpg

    You might look at the fuser exit roller pressure adjustment. I find that endusers often fuss with this adjustment causing jamming. Set to the middle setting with the white triangle.

    fuser exit roller pressure setting.jpg

    =^..^=
    Last edited by blackcat4866; 07-07-2021 at 11:29 PM.
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  3. #3
    Retired 10,000+ Posts
    Konica Minolta accurio press c2060 keeps Jamming

    slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    34,131
    Rep Power
    989

    Re: Konica Minolta accurio press c2060 keeps Jamming

    In the future I would recommend that you post your problems in KM forum https://www.copytechnet.com/forums/konica-minolta/ instead in the general Copier Technical Discussion forum. Not everyone checks here for posts, only a few of us senior techs that have around for years. You're lucky in that BC is one of us and he happens to be one of the best KM techs around.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here