Does anyone have a full list of Ricoh machine and know what smb version they can support?
is there a site i can visit to check?
I have these machine
MPC4501MP9002
MP2401
Do they at least support smb version 2?
thanks
Does anyone have a full list of Ricoh machine and know what smb version they can support?
is there a site i can visit to check?
I have these machine
MPC4501MP9002
MP2401
Do they at least support smb version 2?
thanks
So far I have looked up the MP C4501, this machine will support SMB V2 & V3 in the US market if the custom firmware is applied. I don't know if the custom firmware is available in other markets.
The MP 9002 does support SMB V2 & V3
The MP W2401 does support SMB V2 & V3
You need to check via Web Image Monitor: Device Management - Configuration - SMB - Advanced Settings
Full support, not custom, for the 02 Martini has been available for over three years. The following firmware need to be at the following levels or later.Network Support V11.99.1 D1315553M
Scanner V01.06 D1315580F
Web Support V01.05 D1315574H
System Copy V1.11 D1315572N
Bookmarks