Thanks: 
Likes: im sorry for being noob, can you tell me what particular parts on the picture should i clean..Originally Posted by blackcat4866
301165429_847044896205188_5344366013908469651_n.jpg
Dislikes: 0
im sorry for being noob, can you tell me what particular parts on the picture should i clean..
301165429_847044896205188_5344366013908469651_n.jpg
![[HELP] KYOCERA M2540dn](https://www.copytechnet.com/forums/dbtech/vbdonate_pro/images/awards/contributor.png)
being that you are a noob, as you stated. your best bet is to call a trained tech. if you don't know what you are doing in that area. you could really mess some stuff up. and basically brick the machine.
Cleaning scanner optics on small tabletop MFP's can be a major operation, usually involving removing the DF & the whole scanner assembly, then flipping the scanner assembly upside-down to get to the screws. And there's plenty of opportunities to mess up delicate components.
An experienced tech can get those optics clean in an hour ... and the machine will still work when it's clean. That's my recommendation. =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Reply With Quote
Bookmarks