Dislikes: 0
Hi Friends,
I am new here and this is my first Post, I am having Problem with my Toshiba e-Studio2550c. It stops working and shows on the following error F520. I tried to reset but not having the firmware. One of my Friend gave me the firmware and when I am trying to install 9+4 it shows Copy Signature file in USB.... Please if someone can help me in this problem. I'll be very thankful for your help.
with regards
Did you extract the firmware before copying it to the USB stick?
The USB stick should be formatted FAT32.
The single firmware file comes to you compressed (.zip file extension), and must be extracted before loading to your USB. =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Yes I extracted the zip files in USB and tried after....
Originally Posted by blackcat4866
Are you sure they are the correct firmware files?
The majority of the time, if firmware does not work for me, it's because they are the wrong firmware files, or no files at all, LOL. =^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Does that mean you extracted them after you placed them on the USB? They have to be extracted to a folder on your computer first, then placed on the USB in the proper folder structure. Most copiers do not like zip files on the USB when doing updates.
Ohh
I extracted the files in USB not on my pc, maybe that's why, should I format the USB and try again.....but one thing why the message comes after 4+9 USB "Copy Signature File in USB" ?
Thanks: 
Likes: 
Reply With Quote
Bookmarks