Canon IR ADV 4225 - unable to install firmware on HDD

[cvishruth]

Hi,
I have a fully working canon IR ADV 4225 , and a USB drive with the firmware loaded , I have been trying to flash the firmware to a new HDD (want to use this on a different machine as its HDD is broken) , the firmware loading process gets stopped at 99% and shows a checksum error post which I get E748-2012 error which my engineer was able to fix by doing something with the flash PCB. But when I try to flash the firmware to a new HDD again , I get the same errors. Can someone tell me what's going wrong?

Below are the images of the error.

https://i.imgur.com/xizf11o.jpg

https://i.imgur.com/lx1JLGc.jpg

WhatsApp Image 2023-01-03 at 3.11.21 PM.jpgWhatsApp Image 2023-01-03 at 3.11.24 PM.jpg

[ADV COPIER]

Hi,
I have a fully working canon IR ADV 4225 , and a USB drive with the firmware loaded , I have been trying to flash the firmware to a new HDD (want to use this on a different machine as its HDD is broken) , the firmware loading process gets stopped at 99% and shows a checksum error post which I get E748-2012 error which my engineer was able to fix by doing something with the flash PCB. But when I try to flash the firmware to a new HDD again , I get the same errors. Can someone tell me what's going wrong?

Below are the images of the error.

https://i.imgur.com/xizf11o.jpg

https://i.imgur.com/lx1JLGc.jpg

WhatsApp Image 2023-01-03 at 3.11.21 PM.jpgWhatsApp Image 2023-01-03 at 3.11.24 PM.jpg

your firmware is broken

[cvishruth]

your firmware is broken

Are you sure a 100% ? if yes , can you please share the firmware

cvishruth@gmail.com