Thanks Thanks:  0
Dislikes Dislikes:  0
Results 1 to 2 of 2
  1. #1
    Trusted Tech 50+ Posts
    Riso MZ790U Machine Won't Accept Drum #2

    unwork_inc's Avatar
    Join Date
    Nov 2016
    Location
    Tucson, Arizona
    Posts
    54
    Rep Power
    16

    Riso MZ790U Machine Won't Accept Drum #2

    Drum #1 on this machine works fine, but Drum #2 just won't go all the way in.

    Please review the attached image below:

    2018-03-23 16.56.20.jpg

    You can see that the drum connector and lock mechanism (the rectangular part with the 3-point screwed piece) for #1 (left) is in the correct position. Whereas on #2 (right) it's pushed forwards. This seems to be what's preventing Drum #2 from being inserted all the way into its correct position. I've tried gently pushing this piece back but it seems tightly in place and I wouldn't want to damage it.

    Any ideas how to go about this?
    Thanks in advance

  2. #2
    Trusted Tech 50+ Posts
    Riso MZ790U Machine Won't Accept Drum #2

    unwork_inc's Avatar
    Join Date
    Nov 2016
    Location
    Tucson, Arizona
    Posts
    54
    Rep Power
    16

    Thumbs up Re: Riso MZ790U Machine Won't Accept Drum #2

    Fixed: There's a white plastic gear at the back of this piece which actuates the horizontal alignment of the piece. If you patiently rotate this gear with your thumb the piece gos back into its normal position.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here