First post - I've gained some help from the forum in getting my riso's running.

Currently, I have two Riso MZ790 - both need exit belts from roller to exit tray. The ones on both machines are too stretchy to carry the 11X17 110lb index for a job I'm currently running (50,000 sheets).

7-10 day waiting for new from Riso - I'm reaching out to you to see if you might have some in stock. I'm in the middle of a job that requires finishing asap. I don't necessarily need all of these to get the paper to exit without slowing down and jamming.

Here are the part numbers, Most needed are the exit belts.

(4) 629-00003-000 - exit belt - Flat 15x0.65x303
(6) 629-00004-007 - exit (suction) belt - flat 15x0.55x482
(1) 023-21261-202 - Shaft
(8) 628-00002-007 Master disposal Belts
(8) 628-00001-000 Master disposal Belts