Results 1 to 6 of 6
  1. #1
    Senior Tech 100+ Posts
    Join Date
    Jul 2013
    Location
    Kumasi Ashanti
    Posts
    112
    Rep Power
    0

    Getting Round C53 Riso GR1700

    Hello,I overhauled a black Risograph GR1700 drum assembly. Though it now looks fresh, it does not run after I inserted the drum into the machine. I see C53 when I press the "*" key. I cleared pieces of cut master from the master section. I reset the machine through the two upper right keys, but all to no avail.Could someone with success or experience in my situation be of help? I don't have access to a manual, so I'm stuck. I'll be so indebted in thanks to you for your help!

  2. #2
    Riso dude 250+ Posts jermyth's Avatar
    Join Date
    Mar 2011
    Location
    Land of Diffusion
    Posts
    370
    Rep Power
    23

    Thumbs up Re: Getting Round C53 Riso GR1700

    C52: the drum set switch is not depressed/actuated.

    Since you took apart a drum without a manual you probably to the plate to actuate the drum set switch on wrong or mixed up with the position sensor plates.

    Good luck.

  3. #3
    Senior Tech 100+ Posts
    Join Date
    Jul 2013
    Location
    Kumasi Ashanti
    Posts
    112
    Rep Power
    0

    Re: Getting Round C53 Riso GR1700

    Quote Originally Posted by jermyth View Post
    C52: the drum set switch is not depressed/actuated.Since you took apart a drum without a manual you probably to the plate to actuate the drum set switch on wrong or mixed up with the position sensor plates.Good luck.
    Hello,I'm so grateful for the quick response. I'll work on it asap. However, may I know if you intended to type C53 instead of the "C52" in your post. If it was intended, may I know if the two codes are related to the same thing?

  4. #4
    Senior Tech 250+ Posts 20gaugeO/U's Avatar
    Join Date
    Feb 2009
    Posts
    480
    Rep Power
    30

    Re: Getting Round C53 Riso GR1700

    C53 is install ink tube. Are you using generic or have a connector not in the right place or fully seated

  5. #5
    Riso dude 250+ Posts jermyth's Avatar
    Join Date
    Mar 2011
    Location
    Land of Diffusion
    Posts
    370
    Rep Power
    23

    Re: Getting Round C53 Riso GR1700

    Sorry looked up wrong code. 20gauge is correct. Something with the ink tube set switch or generic ink.

  6. #6
    Senior Tech 100+ Posts
    Join Date
    Jul 2013
    Location
    Kumasi Ashanti
    Posts
    112
    Rep Power
    0

    Re: Getting Round C53 Riso GR1700

    Quote Originally Posted by 20gaugeO/U View Post
    C53 is install ink tube. Are you using generic or have a connector not in the right place or fully seated
    Hello,Your suggestion proved to be so useful! I'm so grateful. A spring to the ink tube switch was disengaged.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here