Thanks:
0
Likes:
0
Dislikes:
0
-
Senior Tech
100+ Posts
- Rep Power
- 25
RZ-220 Error codes
Came across an RZ220 displaying error codes D04-560 & D17-237.
Check the meaning of the codes and troubleshoot. Did not find any cut wires. Replace print cylinder with a working one but error codes remains.
Just want to ensure that such an issue is caused by the Mech_Ctrl PCB before I order a new one because they are very expensive.
-
Re: RZ-220 Error codes
Are you using generic ink and masters??? Seems odd both RF tags have failed
-
Senior Tech
100+ Posts
- Rep Power
- 25
Re: RZ-220 Error codes
no generic. ink and master are OEM.
-
Re: RZ-220 Error codes
Only time I've had an RF issue was on a new machine where the master roll sensor connector had popped out in shipping transport. You've already tried a new drum, have you tried different ink and masters from a different lot number? Had a few very low volume machines where the ink was in the machine for so long it made them change it out even though it was still 1/3 full...
Otherwise cut tie wraps and reseat all connectors before ordering a new (different) board. They are old enough you should be able to find a used one
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks