Thanks Thanks:  0
Dislikes Dislikes:  0
Page 1 of 2 12 LastLast
Results 1 to 10 of 11
  1. #1
    Junior Member
    Join Date
    Dec 2020
    Location
    minneapolis, MN
    Posts
    6
    Rep Power
    0

    Riso RZ 220ui programming a new color drum

    I am trying to program an color drum. I bought a used drum that was lavender and am trying to go to blue. I have been able to ink it in test mode, but when I take it out of test I get the d-02 532 error.

    I haven't printed at all with this drum, so I'm not sure that it was operational when I received it.

    This is what what I've done based off the manual:
    1. With the print drum out- and 2 fingers on the print position left and right buttons - I turn on the machine.
    2. Release the 2 buttons and put the print drum in the machine.
    3. I press the reset button and error "h101" shows
    4. Enter "2" for color and hit start.
    5. After that the display shows all 0000s.

    Once I turn the printer off and on it comes up with the d-02 532 error. Any insight would be helpful.

  2. #2
    Field Supervisor 500+ Posts 20gaugeO/U's Avatar
    Join Date
    Feb 2009
    Posts
    547
    Rep Power
    41

    Re: Riso RZ 220ui programming a new color drum

    D02-532 is incorrect print drum is used. Are you sure it's not an EZ drum? EZ and RZ drums are not interchangeable. The outside of the case should have a sticker on the side of it

  3. #3
    Junior Member
    Join Date
    Dec 2020
    Location
    minneapolis, MN
    Posts
    6
    Rep Power
    0

    Re: Riso RZ 220ui programming a new color drum

    I just confirmed that both drums are RZ2 legal.

  4. #4
    Field Supervisor 500+ Posts 20gaugeO/U's Avatar
    Join Date
    Feb 2009
    Posts
    547
    Rep Power
    41

    Re: Riso RZ 220ui programming a new color drum

    With your Blue Ink in the drum
    Run Service mode 117
    Then run service mode 890
    Turn the power off and on

  5. #5
    Junior Member
    Join Date
    Dec 2020
    Location
    minneapolis, MN
    Posts
    6
    Rep Power
    0

    Re: Riso RZ 220ui programming a new color drum

    I am writing out the exact steps I've done to make sure I'm executing the process properly.

    • With the drum in the machine, and starting in service mode (print position UP & Down)
    • Display shows d-02-532
    • Hit reset button (Its the only button that will clear the display)
    • Display shows H101
    • Enter 2 (for color drum) hit Start
    • Display shows 0000
    • Enter 117, hit Start, hear 2 beeps.
    • Display shows 0117, hit Stop to clear
    • Display shows 0000
    • Enter 890, hit Start, hear 2 beeps.
    • Turn machine off and on.
    • Display shows d-02-532

  6. #6
    Field Supervisor 500+ Posts 20gaugeO/U's Avatar
    Join Date
    Feb 2009
    Posts
    547
    Rep Power
    41

    Re: Riso RZ 220ui programming a new color drum

    Take the drum PCB off a working drum and put on this drum to troubleshoot

  7. #7
    Junior Member
    Join Date
    Dec 2020
    Location
    minneapolis, MN
    Posts
    6
    Rep Power
    0

    Re: Riso RZ 220ui programming a new color drum

    Still unable to program the color drum.

    I swapped out the PCB for each drum. The color drum still doesn't work and the black drum is working like it was before.

  8. #8
    Field Supervisor 500+ Posts 20gaugeO/U's Avatar
    Join Date
    Feb 2009
    Posts
    547
    Rep Power
    41

    Re: Riso RZ 220ui programming a new color drum

    Know anybody else with an RZ 220? A school or church maybe or if they have an EZ 220 put it in there and see what message you get. It still thinks you have the wrong drum. Without another machine or another drum to troubleshoot with it's hard to say. Contact a local service rep and ask them if they have any.

  9. #9
    Junior Member
    Join Date
    Dec 2020
    Location
    minneapolis, MN
    Posts
    6
    Rep Power
    0

    Re: Riso RZ 220ui programming a new color drum

    I'll see if I can track one down. Would it help to see if I tried to make my black drum to a color drum?

  10. #10
    Field Supervisor 500+ Posts 20gaugeO/U's Avatar
    Join Date
    Feb 2009
    Posts
    547
    Rep Power
    41

    Re: Riso RZ 220ui programming a new color drum

    Sure can try anything you'd like and feel comfortable with

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here