Dislikes:
0
-
Technician
- Rep Power
- 18
MZ1090 power supply issue
Hello all,
I have a Riso MZ1090 that shut down in the middle of a print run. When I try to power up the machine I can hear a clicking sound and the wake up button flashes on and off. I have removed the front panels and checked all of the connections that may have been knocked loose. The fuses I was able to locate are fine. It seems like power is unable to reach some key area but I'm at a loss for where that might be. The power cable is in the proper position and I have powered up another machine using the same outlet no problem. Any help would be greatly appreciated. Thank you!
-
Re: MZ1090 power supply issue
Sounds like a component or two on the power supply board is blown. Been there. I'm thinking your going to have to find a new board. I have not heard of anyone repairing RISO boards in a long time. Good luck.
-
Technician
- Rep Power
- 18
Re: MZ1090 power supply issue
jermyth any idea where I might find a new board?
-
Re: MZ1090 power supply issue
If you can find a RISO dealer in your area, but they will be expensive. Estimate from a dealer, $1000. BTW part number 047-50505 power supply PS22-HWW.
Try posting in the parts forum or the wanted forum or both. Try Ebay??
Goog luck.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks