Paper Feed Problems Riso EZ591

[nprint]

feed clutch was clean, one way timing looked good. cleaned paper sensor

Blow out the paper in sensors. Clean or replace the feed clutch. Replace the one way timing gear

[nprint]

pad didnt look to worn, just a slight depression. I flipped it over hoping it helps.. doesn't flutter but still pulls paper 3-4 inches and jams

fluttering sound? check the shock absorber pad and replace if worn-out

[20gaugeO/U]

Did you take the clutch apart and clean the red rust off the faces? Did you put it back together so it still free spins?
The timing gear looks like a one way timing gear, sometimes you just have to replace it

[nprint]

I spent a good portion of the long weekend taking the whole thing apart. I went though the service manual and did all the adjustments.
got it running somewhat good, enough to get by but i think i need to replace the clutch it doesnt seem like its 100% working.

thank you for all your help

Did you take the clutch apart and clean the red rust off the faces? Did you put it back together so it still free spins?
The timing gear looks like a one way timing gear, sometimes you just have to replace it