Results 1 to 2 of 2
  1. #1
    Technician
    Join Date
    May 2017
    Location
    ellijay ga 30536
    Posts
    11
    Rep Power
    11

    Riso EZ 220U Pressure Solenoid

    Hello.

    I have a Riso EZ 220U that is jamming because the pressure roller solenoid wont release. I have checked all the timing and the position of the pressure arm on the drive of the machine and it all seems to be working correctly. The owner of this machine called to report that the machine had jammed and in the process of removing the jam discovered that the drum was stuck. I took the rear cover off and manually released the pressure roller solenoid, and was able to remove the drum/paper jam. But I still haven't been able to sort out the reason for the solenoid not working. The machine jams under the drum on every print because the pressure roller isn't being released. Any help would be appreciated.

  2. #2
    Riso dude 250+ Posts jermyth's Avatar
    Join Date
    Mar 2011
    Location
    Land of Diffusion
    Posts
    407
    Rep Power
    31

    Re: Riso EZ 220U Pressure Solenoid

    Have the manual? Go into test mode and run 886, pressure solenoid ON/OFF. If the solenoid does not actuate then either it's bad or a pinched/cut wire. If it actuates, then you got some other problem with pressure mechanism, possible the pressure lever shock absorber, I've seen them get worn and tacky, causing jamming.

    Good luck.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here