Riso SF5030, I get error T98-087

[id1]

Hello everyone!


I have a Riso SF5030, it started sucking paint badly, I washed the mesh in the drum, and got the error T98-087 : "Test mode adjustments stored in the drum is outside the adjustment range".
Clearing 110 111 through the service menu helps for a few minutes. And again T98-087. Could you please tell me what this error means?
The paint was changed.
The risograph prints blank sheets and the ink is not sucked in.


Thank you in advance for your answer.

[id1]

Colleagues, please help me!

[jermyth]

That error code does not exist in the service manual. If you actually have a T98-097, that would be a hardware error for the drum. First try rebooting the machine. Second the description of the code says "the test mode adjustment value stored in the print drum memory is out of the adjustment range." So I'm wonder what happened prior to the code occurring? Someone switch drums around? Drum not get set correctly in machine after a jam?

Good luck.

[misterno]

Colleagues, please help me!

Hello, I agree that this error code does not exist.
But if he doesn't pull ink and print white papers. One should look at one way gear.
Maybe the ink got into it and now it doesn't work.
I suggest you look at GEAR 1x25x7 OWC (6121-10024)


Good luck