Results 1 to 3 of 3
  1. #1
    Technician
    Join Date
    May 2017
    Posts
    29
    Rep Power
    14

    RP 3700 only burns half of image on the master

    I have a Rp 3700 that only burns half the image on the master the scanner is going all the way across the image I replaced the board that the TPH plugs into same issue. Anyone else had this problem? I also did a test pattern 50 same problem only prints about 5" then nothing.
    Last edited by carolscurriculum; 01-04-2022 at 07:19 PM.

  2. #2
    Retired 10,000+ Posts
    RP 3700 only burns half of image on the master

    slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    34,126
    Rep Power
    989

    Re: RP 3700 only burns half of image on the master

    Pull the drum and check to see if you have a piece of master material or paper stuck top the screen under the master. It will give the same effect.

  3. #3
    Service Manager 10,000+ Posts
    RP 3700 only burns half of image on the master

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    22,656
    Rep Power
    658

    Re: RP 3700 only burns half of image on the master

    Quote Originally Posted by slimslob View Post
    Pull the drum and check to see if you have a piece of master material or paper stuck top the screen under the master. It will give the same effect.
    +1

    Sent from my SM-G960U using Tapatalk

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here