T98-6 FRAM checksum error on SF5130EIIU- Firmware needed?

[GramPaBo]

Hello all - I am getting a T98-6 error on a SF5130EIIU- Serial number is 44102181 even after reset with 110 and 111

From what I found in other posts the first thing I need to try is to reload firmware - is there an open safe site to get this from?

And or any other advice Like is the next step the Main System PCB or something odd like the drum

Thank you all very much in advance for your assistance!

[20gaugeO/U]

Reseat all the connectors and check that the clock / time is set correctly both in user settings and service modes. Firmware is up to 3.0.0 so what do you have on your machine?

[GramPaBo]

Hello all - I am getting a T98-6 error on a SF5130EIIU- Serial number is 44102181 even after reset with 110 and 111

From what I found in other posts the first thing I need to try is to reload firmware - is there an open safe site to get this from?

And or any other advice Like is the next step the Main System PCB or something odd like the drum

Thank you all very much in advance for your assistance!

hello all - was just reminded of my posting this- here’s the fix:

Perform this memory initialization 1^st before loading firmware.
The latest firmware version corrects the T98-006 code

Perform TM9874 to activate protected mode TM’s to initialize memory then:
TM1198
TM110
TM112
TM111
TM1193