Results 1 to 2 of 2
  1. #1
    Senior Tech 100+ Posts
    P2040 Slow printing via Bypass

    nobody-here's Avatar
    Join Date
    Mar 2008
    Posts
    234
    Rep Power
    38

    P2040 Slow printing via Bypass

    Hi everybody,

    We are new to Kyocera / Olivetti printers & MFP.

    We are noticing that printer, P2040, is slow when printing from BYPASS. We tried different drivers but no luck
    What else can we check.

    Silent print is disabled.

    Thank you for your help.
    29 rouge unpair manque.... cous cous....

  2. #2
    Master Of The Obvious 10,000+ Posts
    P2040 Slow printing via Bypass

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,442
    Rep Power
    462

    Re: P2040 Slow printing via Bypass

    Only the bypass, or any time it awakens?

    Silent Mode increases warmup time. So does a Thick media setting (maybe the bypass is set to Thick1?). =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here