Anyone run into one of these machines that just keeps rebooting? Tried all the basic stuff turning off and on unplugging ,pulled network cable just in case its a bad print job. Figure next would be trying firmware upgrade. Any other ideas? Not real experienced with this model. Thanks for any help.
i know the whole line is a POSOriginally Posted by masterchill
Not familiar with this model in particular, but if it has an HDD, that would be my next move. A lot of the Xerox equipment goes into a reboot cycle when the HDD pukes.
A horrible line of equipment this range. We had a few out and had to pull them due to ongoing problems. Never came across the constant reboot, i would try he basics of a cold reset, firmware upgrade then you are into formatter territory. I would choose to upgrade the model than go the formatter route though.
Thanks: 
Likes: 
Dislikes: 
Reply With Quote
Bookmarks