Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 10 of 10
  1. #1
    Technician Nikola Karamanov's Avatar
    Join Date
    Apr 2016
    Posts
    29
    Rep Power
    7

    Unhappy Hp color laserjet 4700 reset fuser and itb counter

    Hello, everyone! I am interested in how to reset a counter on HP Color Laserjet 4700 on fuser and transfer belt! There is information that it goes with a resistor, but I haven't tried whether it works. I would be very grateful if anyone knew and tried this method!!

  2. #2
    Technician
    Join Date
    Apr 2017
    Location
    Los Angeles
    Posts
    20
    Rep Power
    5

    Re: Hp color laserjet 4700 reset fuser and itb counter

    I can do it on the ITB but not the fuser. Still looking for the method on the fuser

  3. #3
    Service Manager 2,500+ Posts
    Hp color laserjet 4700 reset fuser and itb counter

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    4,902
    Rep Power
    82

    Re: Hp color laserjet 4700 reset fuser and itb counter

    new parts will reset it ...

    are you using USED or third party parts?

  4. #4
    Technician Nikola Karamanov's Avatar
    Join Date
    Apr 2016
    Posts
    29
    Rep Power
    7

    Re: Hp color laserjet 4700 reset fuser and itb counter

    HI! I use USED parts. For the ITB there is resistor which can be changed, does not look difficult! I haven't tried with the fuser unit yet. The fuser unit must have resistor too. New parts are very expensive!

  5. #5
    Service Manager 2,500+ Posts
    Hp color laserjet 4700 reset fuser and itb counter

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    4,902
    Rep Power
    82

    Re: Hp color laserjet 4700 reset fuser and itb counter

    Quote Originally Posted by Nikola Karamanov View Post
    HI! I use USED parts. For the ITB there is resistor which can be changed, does not look difficult! I haven't tried with the fuser unit yet. The fuser unit must have resistor too. New parts are very expensive!
    you will have other issues down the road if you continue with this practice.

  6. #6
    Technician
    Hp color laserjet 4700 reset fuser and itb counter

    AL parts's Avatar
    Join Date
    Jun 2019
    Location
    guangzhou
    Posts
    15
    Rep Power
    0

    Re: Hp color laserjet 4700 reset fuser and itb counter

    Quote Originally Posted by Nikola Karamanov View Post
    Hello, everyone! I am interested in how to reset a counter on HP Color Laserjet 4700 on fuser and transfer belt! There is information that it goes with a resistor, but I haven't tried whether it works. I would be very grateful if anyone knew and tried this method!!
    4700 fuser kit.jpgIn fact, you only need to replace the resistor to achieve reset.

  7. #7
    Technician Nikola Karamanov's Avatar
    Join Date
    Apr 2016
    Posts
    29
    Rep Power
    7

    Re: Hp color laserjet 4700 reset fuser and itb counter

    In this case I have parts to recycle the fuser unit, sleeve, gears... i just need to reset the counter!

  8. #8
    Technician
    Hp color laserjet 4700 reset fuser and itb counter

    AL parts's Avatar
    Join Date
    Jun 2019
    Location
    guangzhou
    Posts
    15
    Rep Power
    0

    Re: Hp color laserjet 4700 reset fuser and itb counter

    Quote Originally Posted by Nikola Karamanov View Post
    In this case I have parts to recycle the fuser unit, sleeve, gears... i just need to reset the counter!
    Yes, the refurbished fuser is also done this way.

  9. #9
    Senior Tech 100+ Posts
    Hp color laserjet 4700 reset fuser and itb counter

    Lasersupplies's Avatar
    Join Date
    Jul 2011
    Location
    Belfast
    Posts
    201
    Rep Power
    0

    Re: Hp color laserjet 4700 reset fuser and itb counter

    A resistor under the back cover resets the fuser assembly. I have seen this fuser run a few times, eventually the sleeve or pressure roller goes but you will get another run. As for the ITB, these things never fail on this model. So robust!! i wish HP had stuck with this belt instead of the CP range they brought in, nothing but problems.

  10. #10
    Technician Nikola Karamanov's Avatar
    Join Date
    Apr 2016
    Posts
    29
    Rep Power
    7

    Re: Hp color laserjet 4700 reset fuser and itb counter

    Thank You very much! Do you know the resistance of the resistor and whether the watt matters?

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here