Results 1 to 6 of 6
  1. #1
    Senior Tech 250+ Posts
    Join Date
    Apr 2014
    Location
    Los Angeles
    Posts
    382
    Rep Power
    20

    thank you Lance15 for the help, again.

    Hey Brother,thank you
    Jim
    Last edited by tonerjockey; 11-14-2019 at 06:52 PM.

  2. #2
    Field Supervisor 500+ Posts Zeldaman's Avatar
    Join Date
    Mar 2011
    Location
    Stuttgart/Baden Wuerttemberg
    Posts
    909
    Rep Power
    38

    Re: Lance15 question re the HP color laser jet pro M452dw error 59.f0

    Hi there!
    Normaly the file stays on the usb-drive, i loaded this fw on many MFPs with one drive. If its gone, you may have a bad usb-drive.
    Greetings...

  3. #3
    Senior Tech 100+ Posts
    Join Date
    Jun 2012
    Posts
    142
    Rep Power
    0

    Re: Lance15 question re the HP color laser jet pro M452dw error 59.f0

    Hello, today I want to flash DCC controller with DCC firmware: but at HP color LJ Pro M452dn is not possible to use USB key for flashing DCC firmware (more at the link):

    https://www.copytechnet.com/forums/r...VZqaUZvaVQ3TWs

    I tried method 2 and method 3, but nothing happened - the error 59.f0 still there.
    When this DCC flashing is not working what spare part to change first?

    - RM2-7909 - Assy-Engine Controller PCB (duplex)
    - RM2-6454 - Intermediate transfer belt (ITB) assembly
    - RM2–7342 - drum motor assembly
    - other?

    Thank you for help.

  4. #4
    Field Supervisor 500+ Posts
    Join Date
    Jun 2015
    Location
    Lutherville, MD
    Posts
    871
    Rep Power
    31

    Re: Lance15 question re the HP color laser jet pro M452dw error 59.f0

    RM2-6454 - Intermediate transfer belt (ITB) assembly

  5. #5
    Field Supervisor 500+ Posts
    Join Date
    Jun 2015
    Location
    Lutherville, MD
    Posts
    871
    Rep Power
    31

    Re: Lance15 question re the HP color laser jet pro M452dw error 59.f0

    Have an M452 in the shop now for ITB under warranty. I wish the M452(dn) were like the M477's or M452(nw) with the front USB port. You can still upgrade the DC Controller on these with the front USB ports.

    I tried doing the upgrade with sharing the printer with the error on the panel, but, it didn't do anything.

  6. #6
    Field Supervisor 500+ Posts
    Join Date
    Jun 2015
    Location
    Lutherville, MD
    Posts
    871
    Rep Power
    31

    Re: Lance15 question re the HP color laser jet pro M452dw error 59.f0

    Tech replaced the ITB. No more 59.F0.

    Tried using "Method 2" on upgrading the DC Controller firmware on the M452dn. Install the driver, share the printer and use the 'copy /b <firmware path> <share>' from a command prompt. The control panel said "Printing Document". Printed config page afterwards. DIDN'T UPGRADE.

    Gave the printer an IP address, enabled the FTP protocol (it's disabled by default). Connected laptop via crossover cable. Resent the firmware using FTP. The control panel said "Performing Upgrade". THIS time, it successfully upgraded the DC Controller firmware.

    Moral of the story is to use FTP instead of 'copy /b'. The 'copy /b' DOESN'T work.

    If you have the M452dw, M377 or M477 variants, you should just be able to use the front USB port to send the DC Controller firmware.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here