Page 1 of 2 12 LastLast
Results 1 to 10 of 11
  1. #1
    Service Manager 1,000+ Posts
    scan to SMB not possible AFAIK


    Join Date
    Sep 2011
    Location
    Perth, Western Australia
    Posts
    1,894
    Rep Power
    69

    scan to SMB not possible AFAIK

    HP E77822dn

    Had a customer who bought a HP E77822dn

    no server just workgroup environment.

    Setup shared folders but copier would always report specified folder doesn't exist.
    Had to use IP address as no local DNS

    Do a packet capture on the port and discovered even with IP address its still trying to resolve to a DNS server and when it cant the job is set to Scheduled.

    In the end just installed a FTP server on each PC and scanned with that instead and that worked fine

  2. #2
    Junior Member
    Join Date
    Nov 2008
    Posts
    9
    Rep Power
    0

    Re: scan to SMB not possible AFAIK

    Quote Originally Posted by rrrohan View Post
    HP E77822dn

    Had a customer who bought a HP E77822dn

    no server just workgroup environment.

    Setup shared folders but copier would always report specified folder doesn't exist.
    Had to use IP address as no local DNS

    Do a packet capture on the port and discovered even with IP address its still trying to resolve to a DNS server and when it cant the job is set to Scheduled.

    In the end just installed a FTP server on each PC and scanned with that instead and that worked fine


    Be aware on newer HP firmware, the full path must be entered and domain/user has to be used for scan to network to operate properly.

    This was on a pagewide firmware update but should be the same for other newer FS3/FS4 firmware requirements. From the firmware readme

    IMPORTANT! EXISTING SCAN TO NETWORK PROFILE SETTINGS MAY REQUIRE REVISION AFTER APPLYING THIS FIRMWARE UPDATE IN ORDER TO PROVIDE INCREASED NETWORK SECURITY, SUPPORT FOR SMB V2/V3 NETWORK PROTOCOLS HAS BEEN ENABLED BEGINNING WITH FIRMWARE VERSION 001.1829A (see below) FOR THE PRODUCTS LISTED ABOVE. WITH THE ENABLEMENT OF SMB V2/V3, USERS ARE NOW REQUIRED TO ADHERE TO NETWORKING STANDARDS FOR SPECIFICATION OF NETWORK PATHS AND USER AUTHENTICATION. PLEASE ENSURE THAT FULLY QUALIFIED DOMAIN NAMES ARE USED FOR NETWORK PATHS, AND THAT DOMAIN IS INCLUDED IN CONJUNCTION WITH USERNAME FOR AUTHENTICATION SETTINGS WHEN UPDATING EXISTING SCAN TO NETWORK FOLDER PROFILES OR CREATING NEW SCAN TO NETWORK FOLDER PROFILES.

    EXAMPLES: Network Location Using Fully Qualified Domain Name: \\machinename.domain.yourcorpname.net\scantonetwor kfoldername\
    Username including Domain NameOMAIN\username

  3. #3
    Technician aficio63's Avatar
    Join Date
    Jun 2014
    Posts
    35
    Rep Power
    20

    Angry Re: scan to SMB not possible AFAIK

    Interesting...I have the identical model with the same scan to network folder issue. No matter how the path is set up, will not authenticate with the same message.
    I have a L3 support ticket open with HP...still working on it.

  4. #4
    Service Manager 1,000+ Posts
    scan to SMB not possible AFAIK


    Join Date
    Sep 2011
    Location
    Perth, Western Australia
    Posts
    1,894
    Rep Power
    69

    Re: scan to SMB not possible AFAIK

    Quote Originally Posted by aficio63 View Post
    Interesting...I have the identical model with the same scan to network folder issue. No matter how the path is set up, will not authenticate with the same message.
    I have a L3 support ticket open with HP...still working on it.
    Rolling back firmware to 4.8.0.1 resolved it as a temp option. It removes Expert Copy mode though. HP Australia is apparently escalating the issue to the Firmware Dev team

  5. #5
    Service Manager 1,000+ Posts
    scan to SMB not possible AFAIK


    Join Date
    Sep 2011
    Location
    Perth, Western Australia
    Posts
    1,894
    Rep Power
    69

    Re: scan to SMB not possible AFAIK

    Quote Originally Posted by canucktfi View Post


    EXAMPLES: Network Location Using Fully Qualified Domain Name: \\machinename.domain.yourcorpname.net\scantonetwor kfoldername\
    Username including Domain NameOMAIN\username
    what if they arent on a Domain?

  6. #6
    Technician aficio63's Avatar
    Join Date
    Jun 2014
    Posts
    35
    Rep Power
    20

    Re: scan to SMB not possible AFAIK

    Tried to set up through laptop direct to copier, no go.

  7. #7
    Service Manager 1,000+ Posts
    scan to SMB not possible AFAIK


    Join Date
    Sep 2011
    Location
    Perth, Western Australia
    Posts
    1,894
    Rep Power
    69

    Re: scan to SMB not possible AFAIK

    Quote Originally Posted by aficio63 View Post
    Tried to set up through laptop direct to copier, no go.
    Yeah once you load the older firmware it will work

  8. #8
    Senior Tech 100+ Posts
    Join Date
    Mar 2009
    Location
    Marianna, FL
    Posts
    158
    Rep Power
    32

    Re: scan to SMB not possible AFAIK

    how did you get the older firmware? from HP?

  9. #9
    Service Manager 1,000+ Posts
    scan to SMB not possible AFAIK


    Join Date
    Sep 2011
    Location
    Perth, Western Australia
    Posts
    1,894
    Rep Power
    69

    Re: scan to SMB not possible AFAIK

    via HP support but then i realised I could of done it via HP SDS Action center.

    If you make a donation to the forum I can give you a download link

  10. #10
    Service Manager 1,000+ Posts
    scan to SMB not possible AFAIK


    Join Date
    Sep 2011
    Location
    Perth, Western Australia
    Posts
    1,894
    Rep Power
    69

    Re: scan to SMB not possible AFAIK

    HP advised us that 4.10 has resolved this issue

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here