hp pagewide pro 452dw

[hani002]

Hi guys
i have 2 hp 452dw ,try to remove the main board from printer 1 to printer 2 and this code coming on the display error code 0x8b380001 ec critical_da
then return back the orginal board to printer 1 and coming the same code.
any help...

[Phil B.]

Hi guys
i have 2 hp 452dw ,try to remove the main board from printer 1 to printer 2 and this code coming on the display error code 0x8b380001 ec critical_da
then return back the orginal board to printer 1 and coming the same code.
any help...

YUP just trashed them both,,,

why did swap boards in the first place?

frankly these AREN'T worth fixing if having a printbar issue.

[hani002]

i just use one and return it back
and return back the orginal board to the machine and come the same code
any solution...

[Phil B.]

i just use one and return it back
and return back the orginal board to the machine and come the same code
any solution...

sure BUY another POS like this and DON'T go switching boards around if you don't know what to do or don't have a damn service manual

you have bricked both units ! nice going!

end users should NOT do board swap if you don't know what the fuck you are doing.

[Phil B.]

Hi guys
i have 2 hp 452dw ,try to remove the main board from printer 1 to printer 2 and this code coming on the display error code 0x8b380001 ec critical_da
then return back the orginal board to printer 1 and coming the same code.
any help...

hey BUTTWIPE you don't have a profile... wank off

[hani002]

i dont understand why i fuck this boards
iam prof electronic technical and know every things about electronics the problem i think its software and need to reset or program the eprom
not more
the 2 machines was work before changing the boards and it is my machine
iam sure there is solution

[hani002]

i was member in this site from 1999 and stop logging for long time and return back today but with new user
iam waiting the admin to activate my old profile

[Phil B.]

i dont understand why i fuck this boards
iam prof electronic technical and know every things about electronics the problem i think its software and need to reset or program the eprom
not more
the 2 machines was work before changing the boards and it is my machine
iam sure there is solution

iam prof electronic technical and know every things about electronics

I guess you don't know EVERYTHING

fuck it I'm done with your know it all attitude..

such an electronics genius should have to come beg for help then tell the TECH basically " YOU'RE WRONG"

done dipshit..congrats

shit you can't even write a proper sentence

why didn't an ELECTRONICS EXPERT fill out his profile... you sound more like a child. I would block you but since you didn't I can't..
fucking asswipes waste time with this bullfuckingshit

[hani002]

fuck uuuuuuuuuuuu
u think u r right
and u cant give any answer
fuck uuuuuuuuuuuuuuuuu

[copiertec]

Thanks for the Friday night, laugh, Phil!