Dislikes:
0
-
Senior Tech
100+ Posts
- Rep Power
- 15
Re: L26500 or Latex 260 system error 24:10 broken bag error
I ran the test for the curing system as well as all the heating and curing service tests. About the 1st 3 times, the curing RCCB breaker tripped. I got system error 14.08:00 at least the 1st time, I think. (Maybe the dryer RCCB tripped too the 1st time. Maybe it had to to get 14.08:00. I got a little confused at the time between green and red indicators on the RCCBs--at 1st I thought green was closed and red was open but it is vice versa.) I thought darn I may have to replace an RCCB, dryer assembly, curing assembly, heater control assembly, or....
I ran it 5 more times and it did not trip again.
It of course has the target of 80 degrees C. It never topped 78 degrees C. I assume that is close enough or OK.
Last edited by pbrooks259; 03-29-2020 at 04:12 AM.
-
Re: L26500 or Latex 260 system error 24:10 broken bag error
I don't have anything to add about a 14.08. Just have to go through the service manual and try to troubleshoot it. Only thing I can suggest is try swapping the two circuit breakers. Maybe it's a bad breaker.
Kiran
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks