Results 1 to 3 of 3

Thread: T920 plotter

  1. #1
    Senior Tech 100+ Posts 1stcavvet's Avatar
    Join Date
    Apr 2015
    Location
    Sterling Heights, Michigan
    Posts
    218
    Rep Power
    15

    T920 plotter

    Customer called said they are getting a message on their printer "faulty communication with firmware server" they said they tried to install new firmware---not sure if it was the reason they tried that or is their problem after trying to do firmware update anybody have any idea what I should be looking at or where I should start---- they said it gets to about 94% then says that on the display I'm going to check the leds to see if that gives me any clue. any ideas would help thanks Courtney

  2. #2
    Field Supervisor 500+ Posts
    T920 plotter

    Kiran Otter's Avatar
    Join Date
    Dec 2013
    Posts
    718
    Rep Power
    26

    Re: T920 plotter

    If I had to guess (which I'm usually doing) it's because their firewall is blocking the site HP uses to store the firmware. Manually update it (if you must) and disable the automatic firmware update.

    Kiran

  3. #3
    Senior Tech 100+ Posts 1stcavvet's Avatar
    Join Date
    Apr 2015
    Location
    Sterling Heights, Michigan
    Posts
    218
    Rep Power
    15

    Re: T920 plotter sorry it's a t1300

    Sorry this is actually a t1300 not a t920 I'm figuring is the same sort of issue their IT guy said he updated the firmware ---so he probably never got it pulled down he thinks he downloaded something that never happened THANKS FOR YOUR INPUT Courtney

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here