Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 4 of 4
  1. #1
    Trusted Tech 50+ Posts
    Join Date
    Apr 2014
    Location
    butler,pa
    Posts
    93
    Rep Power
    0

    m426 mfp adf clicking-no feed

    20k on the meter and pick rollers on feeder come down then turn but paper is not taken in. new roller kit. it makes clicking noise when it starts to feed so i'm thinking the gear that runs from motor to pick rollers, and i see that it's not spared. am i on the right track here or do the motor/gear pack go bad also? thanks--tuey

  2. #2
    Senior Tech 250+ Posts
    Join Date
    Apr 2014
    Location
    Los Angeles
    Posts
    426
    Rep Power
    24

    Re: m426 mfp adf clicking-no feed

    Hi Tuey, did you say the rollers go down on the paper, and they turn?

    if the roller is turning, and the paper isn't moving, then either the roller isn't going down on the paper, of there are also those stop guide gates that have to lift away to allow the paper to go into the adf.

    if you try to "help" the paper in when its trying to feed, does that change anything?


    if the roller isn't turning, i have run into the motor doesn't turn, and i believe on that box, you have to change the complete adf assembly.

    also, if there is anything sticking up around the entrance on the bottom, near the sep pad, like a foreign object or broken guide that will also stop the paper.


    did this happen gradually or suddenly??

    best of luck, Jim

  3. #3
    Trusted Tech 50+ Posts
    Join Date
    Apr 2014
    Location
    butler,pa
    Posts
    93
    Rep Power
    0

    Re: m426 mfp adf clicking-no feed

    yes, they go down and turn, tried helping paper-still no go. haven't tried to move stop gates. manual doesn't really address doc feed at all, not even changing rollers and sep pad. i'
    m going back monday and will get a little move involved but i believe it's gonna be a new adf or machine- what a shame to not sell parts-only whole feeders. tuey

  4. #4
    Senior Tech 250+ Posts
    Join Date
    Apr 2014
    Location
    Los Angeles
    Posts
    426
    Rep Power
    24

    Re: m426 mfp adf clicking-no feed

    totally, but if its like the adf they had on their so called "high speed ink jets" which were just big cheap ink jets, trying to change the adf rollers was such a pain and a joke.

    and even now on the laser jet MFP lines, its really a cost ineffective dilemma for anything that goes bad.


    i guess they fixed us?!


    i would think if the rollers are good, and they go down and turn, something else is stopping the paper.

    have a great weekend brother.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here