Originally Posted by
tonerjockey
Hi Tuey, did you say the rollers go down on the paper, and they turn?
if the roller is turning, and the paper isn't moving, then either the roller isn't going down on the paper, of there are also those stop guide gates that have to lift away to allow the paper to go into the adf.
if you try to "help" the paper in when its trying to feed, does that change anything?
if the roller isn't turning, i have run into the motor doesn't turn, and i believe on that box, you have to change the complete adf assembly.
also, if there is anything sticking up around the entrance on the bottom, near the sep pad, like a foreign object or broken guide that will also stop the paper.
did this happen gradually or suddenly??
best of luck, Jim
Bookmarks