Thanks:
0
Likes:
0
Dislikes:
0
-
HP M 577 stuck on 2.8 after loading firmware.
Installed new HDD, loaded firmware, after going to 1.8, goes to 2.8 and stops. I let it sit for a few hours, stayed the same. Installed a new formatter(heard that causes that problem) Still same thing? Also was suggested to try different firmware (HP has 3 different firmware on site) Neither one changed it. I thought I seen this a few years back with different machine, old age! Can't remember what I did to solve it. Any suggestions would be appreciated. I must be missing a step ( I think)
-
Re: HP M 577 stuck on 2.8 after loading firmware.
Try a different HDD Possibly bad? Good Luck!!
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks