Machine stops intil. after 94% Is this the Hard Drive-Formatter PCB? The Carriage is at the far right making a clicking noise (not from being sticking rail) almost like its trying to add ink
Thanks for the help in advance
Hoosierdaddy
Machine stops intil. after 94% Is this the Hard Drive-Formatter PCB? The Carriage is at the far right making a clicking noise (not from being sticking rail) almost like its trying to add ink
Thanks for the help in advance
Hoosierdaddy
I believe this problem is actually the printheads. I would suggest removing them all and trying to boot the machine if it comes all the way up I would replace all of them if I were quoting a customer
Check this thread HP Designjet T2300
Are you seeing an error message ... or any message? Can you view the web interface? Any error messages there?
=^..^=
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Bookmarks