TC INIT HP MFP E87660

[Fabrice]

Good day all,
I'm looking for the procedure to initialized brand new developer unit on this machine
Technical manual indicate :

4. Select the Service Tools menu.
5. On the Information tab, select the Supply Status menu.
6. Select Field Replacement Unit.
7. Select Developer Unit.
8. Select Reset, to clear the counter.After performing the reset, you must run the toner concentration initialization by selecting TC Init in the same menu screen.
9. Exit the service mode by touching the Home button.

But no found TC Init on the screen
If someone has had this problem or perhaps know the correct procedure or hidden menu

I'm really nnoyed with this

Thanks in advance

[Crowfeather]

You don't the dev powder provided with the cartridge comes pre-mixed with toner, the same as the samsung devices they were based on.

If your concerned about it, just print full colour pages of the colour that you replaced.

[Fabrice]

You don't the dev powder provided with the cartridge comes pre-mixed with toner, the same as the samsung devices they were based on.

If your concerned about it, just print full colour pages of the colour that you replaced.

Thanks for your answer and explanation, but this does not explain why I have developer ratio issues : the developer units are overinked on several machines just after the installation and no founded TC Init in the service menu, as indicated in service manual

[Crowfeather]

Thanks for your answer and explanation, but this does not explain why I have developer ratio issues : the developer units are overinked on several machines just after the installation and no founded TC Init in the service menu, as indicated in service manual

Just to confirm, we're referring to a HP Laser printer, and not the pagewide/ink model?

[Fabrice]

Just to confirm, we're referring to a HP Laser printer, and not the pagewide/ink model?

Hi,
I confirm the model is right CLJ (E87660)
I am very annoyed with this problem
Thanks