Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Results 1 to 6 of 6
  1. #1
    Trusted Tech 50+ Posts Ingersoll's Avatar
    Join Date
    Nov 2008
    Location
    Wasilla, AK
    Posts
    74
    Rep Power
    0

    HP Laserjet M4345 output blurry

    Prints and copies are blurry, changed toner/drum w/ no change. Any ideas?

  2. #2
    Service Manager 1,000+ Posts
    HP Laserjet M4345 output blurry

    prntrfxr's Avatar
    Join Date
    Apr 2008
    Location
    Living in Exile
    Posts
    1,638
    Rep Power
    58

    HP Laserjet M4345 output blurry

    possible causes

    1.) paper (more common problem than you might think, I bring my own paper when image problem is involved)

    2.) Fuser related problem. Rule out the fuser by performing an engine test. (Recommend removing formatter first)

    3.) Blow out entire paper path with compressed air, especially laser scanner area.

    4.) Transfer Roller

    5.) Laser scanner

    6.) Formatter
    Life should NOT be a journey to the grave with the intention of arriving safely in an attractive and well-preserved body, but rather to skid in sideways - Coke in one hand - chocolate in the other - body thoroughly used up, totally worn out and screaming "WOO-HOO, what a ride!".

  3. #3
    Trusted Tech 50+ Posts Ingersoll's Avatar
    Join Date
    Nov 2008
    Location
    Wasilla, AK
    Posts
    74
    Rep Power
    0

    Thanks

    Thanks for the hints, I'll check them out.

  4. #4
    Master Of The Obvious 10,000+ Posts
    HP Laserjet M4345 output blurry

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    22,442
    Rep Power
    462

    Re: HP Laserjet M4345 output blurry

    I just came across this today. Poorly lubricated fixing film was dragging down the motor speed. All I did was clean and re-lubricate the heater surface. Only 20K on the refurbished fuser. =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  5. #5
    Service Manager 5,000+ Posts
    HP Laserjet M4345 output blurry


    Join Date
    Jan 2006
    Location
    Las Vegas, NV
    Posts
    9,940
    Rep Power
    153

    Lightbulb Re: HP Laserjet M4345 output blurry

    This Parts & Service Manual can now be purchased for $12.77 and downloaded immediately after payment from:


    Just Manuals, The Internet's largest selection of manuals ~ Instant Downloads


    Paul@justmanuals.com

  6. #6
    Service Manager 100+ Posts
    Join Date
    Nov 2011
    Posts
    200
    Rep Power
    28

    Re: HP Laserjet M4345 output blurry

    I'll go along with prntrfxr and blackcat and say change the fuser. Weird as it sounds, I've seen more than a few refurbished fusers cause fuzzy prints.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here