HP Designjet T1200 44" Ink Rejection on 72B Ink Cartridges

[zeeaxis]

Dear All,
I have a client who has a HP Designjet T1200 44" plotter. Now with the introduction of 72B Cartridges in Asia/Pacific region, the printer is rejecting these cartridges. I have learned from different forums that a new firmware that makes the new cartridges (i.e., 72B with new part numbers) acceptable must be installed.

I have not been able to find the correct firmware to resolve the issue. Can someone point me in the right direction or a link to the firmware itself? Any help is highly appreciated in this regard.

[Kiran Otter]

Usually I just google 'hp t1200 drivers' and the first link is the HP page with them. It's annoying their own search can't list it.

Driver - HP DesignJet T1200 Printer series | HP(R) Customer Support

Kiran

[zeeaxis]

Usually I just google 'hp t1200 drivers' and the first link is the HP page with them. It's annoying their own search can't list it.

Driver - HP DesignJet T1200 Printer series | HP(R) Customer Support

Kiran

Thanks, I will try this and give you feedback.

Many Thanks, Again.

[rasheddul]

Update the latest firmware from HP website then try using HP72B.

Before installed the firmware should be installed only 72 ink cartridge and get ready the printer.

Firmware link: HP DesignJet T1200 Printer series Software and Driver Downloads | HP(R) Customer Support

TT6-TTAJ_08_04_00.1

457.1 MB

Mar 25, 2021

Regards/RASHED