Dislikes:
0
-
Senior Tech
100+ Posts
- Rep Power
- 17
HP Z2100 Paper Wont Load
Replaced Drive Belt. Machine will not load Paper. When trying to program the settings in the paper menu the paper roll portion has a lock symbol when trying to select Paper roll / Sheet. Is there a way to unlock that setting? Does it need recalibrated?
-
Re: HP Z2100 Paper Wont Load
So to load paper, you simply just feed it in from the roll. If the printer does not beep and take the paper, it's likely the media sensor is stuck, making the printer thing paper is already loaded.
If you reach up under the printer, you can find the plastic 'cage' that holds the media sensor in place. If you just wiggle it around that usually frees the sensor. The front panel should show Ready, or Ready for media, I think.
Kiran
2022-04-15 11.14.26.jpg
-
Senior Tech
100+ Posts
- Rep Power
- 17
Re: HP Z2100 Paper Wont Load
Kiran,
Thank you so much that is exactly what the issue was. Thanks again!!
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks