Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Page 1 of 2 12 LastLast
Results 1 to 10 of 13

Thread: 4345 mfp

  1. #1
    Service Manager 250+ Posts
    Join Date
    Jun 2009
    Location
    Fairfield, Ohio
    Posts
    383
    Rep Power
    28

    4345 mfp

    every time you fax, it comes up with the message "Do you want to continue with these settings" Is there a way to get rid of this message and just have it fax? The customer is annoyed with it but I couldn't find any way to turn it off.

  2. #2
    Master Of The Obvious 10,000+ Posts
    4345 mfp

    blackcat4866's Avatar
    Join Date
    Jul 2007
    Location
    Lapeer, Michigan
    Posts
    19,511
    Rep Power
    371
    Perhaps there is no TTI information programmed? How hard could that be? =^..^=
    If you'd like a serious answer to your request:
    1) demonstrate that you've read the manual
    2) demonstrate that you made some attempt to fix it.
    3) if you're going to ask about jams include the jam code.
    4) if you're going to ask about an error code include the error code.
    5) You are the person onsite. Only you can make observations.

    blackcat: Master Of The Obvious =^..^=

  3. #3
    Service Manager 250+ Posts
    Join Date
    Jun 2009
    Location
    Fairfield, Ohio
    Posts
    383
    Rep Power
    28
    Quote Originally Posted by blackcat4866 View Post
    Perhaps there is no TTI information programmed? How hard could that be? =^..^=
    That's all programmed in there.. it's asking if you want to use the settings.. I'm guessing like the dpi and such.

  4. #4
    Service Manager 1,000+ Posts
    4345 mfp


    Join Date
    Apr 2008
    Location
    Living in Exile
    Posts
    1,639
    Rep Power
    0
    Probably something in settings that can be switched on or off. Service manual says nothing about it, only this:

    "For complete information about troubleshooting fax problems, see the HP LaserJet Analog Fax
    Accessory 300 Service Manual."

  5. #5
    Senior Tech 100+ Posts
    Join Date
    Sep 2009
    Posts
    118
    Rep Power
    25
    Kind of a late reply but I think you have to do this in the EWS. If you log in to the EWS and go to the "digital sending" tab. Than click on "preferences" bottom left menu. At the bottom of this you will see the following below. I believe if you change this to reset immediately this should give you what you are looking for. I know it works like that for email, not sure on the fax have not tested it. Best you can do is try it and see.


    Auto Settings ResetAfter a Digital Sending operation is complete. Immediately reset the device to the default settings. Delay before resetting the device to the default settings.Number of Seconds (10-300) to delay:

  6. #6
    Service Manager 250+ Posts
    Join Date
    Jun 2009
    Location
    Fairfield, Ohio
    Posts
    383
    Rep Power
    28
    Thank you TommyH... that was it.

  7. #7
    Senior Tech 100+ Posts
    Join Date
    Sep 2009
    Posts
    118
    Rep Power
    25
    no problem, good to hear it worked out.

  8. #8
    Service Manager 250+ Posts
    Join Date
    Jun 2009
    Location
    Fairfield, Ohio
    Posts
    383
    Rep Power
    28
    Oops..spoke too soon. That works, but I have on 4345 that has a different web interface page that doesn't have that tab.. it just has two tabs, home and network. it also has a green skin to it instead of blue. They both have the same imbedded jet direct model and firmware. The machines have the same firmware, but the web interfaces are different. How do I correct this? Is there a way to upgrade the web interface?

  9. #9
    Senior Tech 100+ Posts
    Join Date
    Sep 2009
    Posts
    118
    Rep Power
    25
    The only thing I have found that fixes this is a DISK INIT. Let me know if you don't know how to do this. Or if you find something else that fixes it

  10. #10
    Service Manager 250+ Posts
    Join Date
    Jun 2009
    Location
    Fairfield, Ohio
    Posts
    383
    Rep Power
    28
    I will give that a try..thanks a bunch for your help.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here